Tech Support Guy System Info Utility version 1.0.0.2
OS Version: Microsoft Windows XP Professional, Service Pack 3, 32 bit
Processor: Intel(R) Core(TM)2 Duo CPU E6550 @ 2.33GHz, x86 Family 6 Model 15 Stepping 11
Processor Count: 2
RAM: 3070 Mb
Graphics Card: ATI Radeon HD 2400, 1 Mb
Hard Drives: C: Total - 301807 MB, Free - 185063 MB; F: Total - 194418 MB, Free - 48218 MB;
Motherboard: Dell Inc., 0RY007
Antivirus: avast! Antivirus, Updated: Yes, On-Demand Scanner: Enabled
------------------------------------------------------------------------------
I hope this is the right forum to post this in...I have a Samsung LED 23" Monitor Model#: S23A300B. It is less than 2 years old. I bought it brand new. The symptoms of what has been happening...it started not coming on right away when the computer woke back up. I had to keep powering on and off the monitor before it would come on. The power light on the monitor would go solid like it woke up but nothing would be on the screen. So for about a month I went through this when the computer would wake up. But recently the monitor will just not come on now at all. So right now I'm using a temporary monitor to be able to type this message and use my computer. So here is what I have tried. I hooked up the monitor to another computer and still I cannot see anything even though the power light goes solid (not blinking). I have tried a different monitor cable. I also updated my graphic card driver but when I go to start > run > and type dxdiag under the display tab; I can't tell if it's the newly updated driver or not. I also restarted my system after updating the driver and plugged in the monitor again and still can't see anything. When the monitor is only plugged in and not connected to the computer, I CAN see the Check Signal Cable box bouncing around. And every time my computer wakes up or when I first connect the monitor to the computer I see the box in the upper left corner that says Analog and then Digital, then the screen just goes black like it's off accept the power light is on.
So not sure if anyone is able to help with this problem or even if my monitor is fixable.
OS Version: Microsoft Windows XP Professional, Service Pack 3, 32 bit
Processor: Intel(R) Core(TM)2 Duo CPU E6550 @ 2.33GHz, x86 Family 6 Model 15 Stepping 11
Processor Count: 2
RAM: 3070 Mb
Graphics Card: ATI Radeon HD 2400, 1 Mb
Hard Drives: C: Total - 301807 MB, Free - 185063 MB; F: Total - 194418 MB, Free - 48218 MB;
Motherboard: Dell Inc., 0RY007
Antivirus: avast! Antivirus, Updated: Yes, On-Demand Scanner: Enabled
------------------------------------------------------------------------------
I hope this is the right forum to post this in...I have a Samsung LED 23" Monitor Model#: S23A300B. It is less than 2 years old. I bought it brand new. The symptoms of what has been happening...it started not coming on right away when the computer woke back up. I had to keep powering on and off the monitor before it would come on. The power light on the monitor would go solid like it woke up but nothing would be on the screen. So for about a month I went through this when the computer would wake up. But recently the monitor will just not come on now at all. So right now I'm using a temporary monitor to be able to type this message and use my computer. So here is what I have tried. I hooked up the monitor to another computer and still I cannot see anything even though the power light goes solid (not blinking). I have tried a different monitor cable. I also updated my graphic card driver but when I go to start > run > and type dxdiag under the display tab; I can't tell if it's the newly updated driver or not. I also restarted my system after updating the driver and plugged in the monitor again and still can't see anything. When the monitor is only plugged in and not connected to the computer, I CAN see the Check Signal Cable box bouncing around. And every time my computer wakes up or when I first connect the monitor to the computer I see the box in the upper left corner that says Analog and then Digital, then the screen just goes black like it's off accept the power light is on.
So not sure if anyone is able to help with this problem or even if my monitor is fixable.